Bosch Rexroth A10VSO 18 DRG/31R-VPA12N00 specifications and identification record covering the exact code and application evidence required before replacement sourcing.
Image scope: this is a representative product-family image, not evidence of the exact model, current stock or offered unit. Exact-item photos should be requested with the quotation.
PROCUREMENT SUMMARY
A10VSO 18 DRG/31R-VPA12N00 replacement inquiry data
Values below are tied to the cited record. Blank replacement fields are an invitation to review—not proof that a similar suffix will fit.| Parameter | Original reference | Evidence basis |
|---|---|---|
| Original model | A10VSO 18 DRG/31R-VPA12N00 | Bosch Rexroth exact product record R910948472 |
| Displacement | 18 cm³/rev | Exact material-number attribute |
| Working pressure | 280 bar | Exact material-number attribute |
| Rotation | Clockwise, viewed on shaft end | Exact material-number attribute |
| Rated data point | 1500 rpm · maximum flow 27 L/min | Exact material-number attributes |
| Control | DR remote-controlled pressure control | Exact material-number attribute |
| Shaft | ISO shaft with key | Exact material-number attribute |
| Mounting | ISO 3019-2 metric, 2-hole flange | Exact material-number attribute |
| Working ports | B and S metric flange configuration | Exact material-number attribute; drawing still controls dimensions |
| Seal material | FKM | Exact material-number attribute |
| Published weight | 13.17 kg | Exact material-number attribute |
MODEL COMPARISON
Replacement status for A10VSO 18 DRG/31R-VPA12N00
| Decision field | Original | Proposed replacement |
|---|---|---|
| Model | A10VSO 18 DRG/31R-VPA12N00 | Not yet published |
| Relationship | Reference to be replaced | No public alternative |
| Technical position | A10VSO 18 DRG/31R-VPA12N00 · R910948472 | No alternative model is published for this record yet. Submit the complete code and application evidence for candidate review. |
| Order status | Identification supported by cited source | Quotation and interface approval required |
COMPATIBLE APPLICATION
Where the A10VSO 18 DRG/31R-VPA12N00 configuration may be relevant
Open-circuit industrial hydraulic systems that require an 18 cm³/rev variable axial-piston pump, DR remote pressure control, clockwise shaft rotation, ISO 3019-2 metric 2-hole mounting and the stated shaft and port configuration. Final application approval still requires operating pressure, speed, fluid, duty cycle and installation comparison.
IDENTIFICATION CONTEXT
A10VSO series context for this model
Bosch Rexroth A10VSO open-circuit axial piston pump technical identification hub covering series scope, model-code evidence, configuration fields and linked exact records.
- Displacement and control option
- Rotation, shaft and mounting flange
- Port arrangement and through-drive option
- Pressure, speed, fluid and duty cycle
The A10VSO 18 DRG/31R-VPA12N00 record sits inside the A10VSO series identification hub, which documents the series scope, model-code evidence and configuration fields used before a quotation.
Open the A10VSO series identification hubRequest a A10VSO replacement review: Send the complete A10VSO 18 DRG/31R-VPA12N00 nameplate, application and required quantity. The reply will separate matched parameters, differences, open checks and the proposed supply route.
MODEL RECORD
A10VSO 18 DRG/31R-VPA12N00 · R910948472
- Proposed route
- Original or alternative route must be identified by the quotation
- Compatibility status
- Identification record; drawing, control and application review still required
- Warranty route
- Only the terms stated in an accepted quotation apply
Complete Model-Code Review
| Code group | Reference meaning | What we verify |
|---|---|---|
| A10VSO | Open-circuit axial piston variable pump family | Confirm intended circuit and duty |
| 18 | Nominal displacement group | Confirm required flow at actual drive speed |
| DRG | Pressure-control configuration | Confirm control behavior and setting range |
| 31R | Series and clockwise rotation | Confirm rotation viewed from the drive shaft |
| VPA12N00 | Seal, shaft, mounting and connection configuration | Compare official drawing and installed interfaces |
Required Evidence Before Candidate Approval
A public model record does not approve an unnamed replacement. Any direct-fit wording must be limited to the exact offered item, recorded application and interfaces supported by the quotation evidence.
Common applications for A10VSO references
- Industrial power units
- Machine tools
- Presses
- General industrial hydraulics
Order Approval Basis
The physical nameplate, complete model code, confirmed interfaces and approved quotation control the final order.
Any difference affecting installation or operation is stated before order acceptance.