Bosch Rexroth 4WE 6 D6X/EG24N9K4 specifications and identification record covering the exact code and application evidence required before replacement sourcing.
Image scope: this is a representative product-family image, not evidence of the exact model, current stock or offered unit. Exact-item photos should be requested with the quotation.
PROCUREMENT SUMMARY
4WE 6 D6X/EG24N9K4 replacement inquiry data
Values below are tied to the cited record. Blank replacement fields are an invitation to review—not proof that a similar suffix will fit.| Parameter | Original reference | Evidence basis |
|---|---|---|
| Original model | 4WE 6 D6X/EG24N9K4 | Bosch Rexroth exact offer drawing |
| Material number | R900561274 | Bosch Rexroth exact offer drawing |
| Nominal size | NG6 directional spool valve | WE 6 code group |
| Spool | D spool symbol | D code group |
| Design series | Series 60–69 | 6X code group; exact drawing controls dimensions |
| Solenoid | Wet-pin, 24 VDC | EG24 code group |
| Operator / connector | Manual override and DIN connector configuration | N9K4 code group |
MODEL COMPARISON
Replacement status for 4WE 6 D6X/EG24N9K4
| Decision field | Original | Proposed replacement |
|---|---|---|
| Model | 4WE 6 D6X/EG24N9K4 | Not yet published |
| Relationship | Reference to be replaced | No public alternative |
| Technical position | 4WE 6 D6X/EG24N9K4 · R900561274 | No alternative model is published for this record yet. Submit the complete code and application evidence for candidate review. |
| Order status | Identification supported by cited source | Quotation and interface approval required |
COMPATIBLE APPLICATION
Where the 4WE 6 D6X/EG24N9K4 configuration may be relevant
NG6 industrial hydraulic circuits requiring the documented D spool function, 24 VDC wet-pin solenoid and N9K4 operator/connector configuration. Pressure, flow, fluid, mounting and the machine schematic still control final approval.
IDENTIFICATION CONTEXT
4WE6 series context for this model
Bosch Rexroth 4WE6 NG06 solenoid directional valve technical identification hub covering series scope, model-code evidence, configuration fields and linked exact records.
- Spool or control function
- Mounting interface and nominal size
- Voltage, connector and operator option
- Pressure, flow, seals and revision
The 4WE 6 D6X/EG24N9K4 record sits inside the 4WE6 series identification hub, which documents the series scope, model-code evidence and configuration fields used before a quotation.
Open the 4WE6 series identification hubRequest a 4WE6 replacement review: Send the complete 4WE 6 D6X/EG24N9K4 nameplate, application and required quantity. The reply will separate matched parameters, differences, open checks and the proposed supply route.
MODEL RECORD
4WE 6 D6X/EG24N9K4 · R900561274
- Proposed route
- Candidate supply route to be identified and documented by quotation
- Compatibility status
- Identification record; no offered replacement is approved on this page
- Warranty route
- Only the terms stated in an accepted quotation apply
Complete Model-Code Review
| Code group | Reference meaning | What we verify |
|---|---|---|
| WE 6 | Directional spool valve, nominal size 6 | Confirm ISO / CETOP mounting interface |
| D | D spool symbol | Confirm the circuit function against the hydraulic schematic |
| 6X | Series 60–69 | Confirm installation dimensions and revision |
| EG24 | Wet-pin solenoid, 24 VDC | Confirm voltage, current type and coil arrangement |
| N9K4 | Manual override and DIN connector configuration | Confirm connector orientation and plug requirement |
Required Evidence Before Candidate Approval
A public model record does not approve an unnamed replacement. Any direct-fit wording must be limited to the exact offered item, recorded application and interfaces supported by the quotation evidence.
Common applications for 4WE6 references
- Industrial machinery
- Machine tools
- Plastic machinery
- Hydraulic power units
Order Approval Basis
The physical nameplate, complete model code, confirmed interfaces and approved quotation control the final order.
Any difference affecting installation or operation is stated before order acceptance.