Bosch Rexroth 4WE 10 E5X/EG24N9K4/M specifications and identification record covering the exact code and application evidence required before replacement sourcing.
Image scope: this is a representative product-family image, not evidence of the exact model, current stock or offered unit. Exact-item photos should be requested with the quotation.
PROCUREMENT SUMMARY
4WE 10 E5X/EG24N9K4/M replacement inquiry data
Values below are tied to the cited record. Blank replacement fields are an invitation to review—not proof that a similar suffix will fit.| Parameter | Original reference | Evidence basis |
|---|---|---|
| Original model | 4WE 10 E5X/EG24N9K4/M | Bosch Rexroth exact product record |
| Material number | R901278761 | Bosch Rexroth exact product record |
| Nominal size | NG10 direct-operated directional spool valve | WE 10 code group |
| Spool | E spool, three positions | E code group |
| Design series | Series 50–59 | 5X code group; drawing controls interfaces |
| Solenoid | Wet-pin, 24 VDC | EG24 code group |
| Operator / connector | Manual override, DIN connector and corrosion option | N9K4/M code group |
MODEL COMPARISON
Replacement status for 4WE 10 E5X/EG24N9K4/M
| Decision field | Original | Proposed replacement |
|---|---|---|
| Model | 4WE 10 E5X/EG24N9K4/M | Not yet published |
| Relationship | Reference to be replaced | No public alternative |
| Technical position | 4WE 10 E5X/EG24N9K4/M · R901278761 | No alternative model is published for this record yet. Submit the complete code and application evidence for candidate review. |
| Order status | Identification supported by cited source | Quotation and interface approval required |
COMPATIBLE APPLICATION
Where the 4WE 10 E5X/EG24N9K4/M configuration may be relevant
NG10 industrial hydraulic circuits requiring the documented three-position E spool, 24 VDC wet-pin solenoid and N9K4/M option group. Center function, pressure, flow, mounting and environmental exposure must be confirmed for the machine.
IDENTIFICATION CONTEXT
4WE10 series context for this model
Bosch Rexroth 4WE10 NG10 solenoid directional valve technical identification hub covering series scope, model-code evidence, configuration fields and linked exact records.
- Spool or control function
- Mounting interface and nominal size
- Voltage, connector and operator option
- Pressure, flow, seals and revision
The 4WE 10 E5X/EG24N9K4/M record sits inside the 4WE10 series identification hub, which documents the series scope, model-code evidence and configuration fields used before a quotation.
Open the 4WE10 series identification hubRequest a 4WE10 replacement review: Send the complete 4WE 10 E5X/EG24N9K4/M nameplate, application and required quantity. The reply will separate matched parameters, differences, open checks and the proposed supply route.
MODEL RECORD
4WE 10 E5X/EG24N9K4/M · R901278761
- Proposed route
- Candidate supply route to be identified and documented by quotation
- Compatibility status
- Identification record; hydraulic and electrical comparison still required
- Warranty route
- Only the terms stated in an accepted quotation apply
Complete Model-Code Review
| Code group | Reference meaning | What we verify |
|---|---|---|
| WE 10 | Direct-operated directional spool valve, nominal size 10 | Confirm mounting pattern and envelope |
| E | E spool, three positions | Confirm center and switched flow paths |
| 5X | Series 50–59 | Confirm revision and unchanged connection dimensions |
| EG24 | Wet-pin solenoid, 24 VDC | Confirm electrical supply and duty |
| N9K4/M | Manual override, DIN connector and corrosion option | Confirm connector and environmental requirement |
Required Evidence Before Candidate Approval
A public model record does not approve an unnamed replacement. Any direct-fit wording must be limited to the exact offered item, recorded application and interfaces supported by the quotation evidence.
Common applications for 4WE10 references
- Industrial presses
- Power units
- Material handling
- Heavy industrial machinery
Order Approval Basis
The physical nameplate, complete model code, confirmed interfaces and approved quotation control the final order.
Any difference affecting installation or operation is stated before order acceptance.