INDEPENDENT MODEL-CODE AND SOURCING REVIEW
Poclain Hydraulics references accepted for structured RFQ review.
Poclain motor reviews require the complete code, displacement or cam-lobe configuration, brake, wheel or shaft interface and vehicle duty.
PRODUCT COVERAGE
What can enter the review process
CATEGORY ROUTES
Review Poclain Hydraulics references by product category
Start from the product category that matches the installed component, then submit the complete model code.
IDENTIFICATION HIERARCHY
How a Poclain Hydraulics reference moves from a name to a decision
Brand recognition is only the first routing step. The review narrows the inquiry from manufacturer name to product family, series, complete code and finally the installed interfaces and duty.
- Brand and aliasesPoclain Hydraulics, Poclain
- Product familySeparate the reference into the relevant valve, pump, motor or service-part group.
- Complete identifierPreserve every suffix, revision, material number and option character visible on the nameplate or document.
- Installed evidenceCompare interfaces, operating conditions and application before any replacement statement is released.
PRODUCT AND REPLACEMENT ROUTES
Poclain motor and service-part routes
Poclain hydraulic motor requirements, including MCR radial piston motors and MCR03 seal kits, are reviewed by exact code and application duty.
SERIES DIRECTORY
Commonly submitted Poclain Hydraulics references
The table is an inquiry-routing index, not a compatibility chart. Every suffix and installed interface remains subject to review.
| Series reference | Product type | Primary review focus | RFQ route |
|---|---|---|---|
| MS / MSE | Radial piston motors | Displacement, brake and mounting interface | Send full code |
| MI / MZ | Compact or wheel motors | Wheel or shaft interface and vehicle duty | Send full code |
| PM / PH | Mobile pumps | Control, displacement and circuit | Send full code |
| VB / VCT | Braking and control valves | Brake function, pilot pressure and vehicle circuit | Send full code |
FAILURE-MODE REVIEW
Why the series rows need different evidence
These checks explain the decision risk behind each published reference. They are review rules, not a claim that every listed configuration is available.
| Reference | Mismatch risk | Evidence needed for release |
|---|---|---|
| MS / MSE | Rotation, control, shaft, flange or port differences can prevent installation or damage the system. | Code breakdown, displacement/control data and dimensional interface comparison. |
| MI / MZ | A similar motor can differ in displacement, speed, shaft load, brake or drain requirements. | Duty data, displacement, mounting, shaft, ports and option comparison. |
| PM / PH | Rotation, control, shaft, flange or port differences can prevent installation or damage the system. | Code breakdown, displacement/control data and dimensional interface comparison. |
| VB / VCT | The valve may mount but produce the wrong function, response or electrical behavior. | Code breakdown, hydraulic function, interface drawing and electrical data. |
REQUIRED EVIDENCE
Prepare before quotation
- Complete motor, pump or valve code
- Vehicle or machine model
- Brake and mounting configuration
- Operating speed and pressure
- Installed photos and replacement reason
APPLICATION ROUTING
Common inquiry environments
- Agricultural vehicles
- Construction machinery
- Material handling
- Mobile hydrostatic drives
Submit a Poclain Hydraulics reference for review.: Send the complete code, nameplate, quantity, destination and application. We separate confirmed facts, open points and conditional compatibility in the response.