INDEPENDENT MODEL-CODE AND SOURCING REVIEW
Eaton / Vickers references accepted for structured RFQ review.
Legacy and current Vickers references may use different catalog generations. The original code, part number and installation evidence are kept together during review.
PRODUCT COVERAGE
What can enter the review process
CATEGORY ROUTES
Review Eaton / Vickers references by product category
Start from the product category that matches the installed component, then submit the complete model code.
IDENTIFICATION HIERARCHY
How a Eaton / Vickers reference moves from a name to a decision
Brand recognition is only the first routing step. The review narrows the inquiry from manufacturer name to product family, series, complete code and finally the installed interfaces and duty.
- Brand and aliasesEaton / Vickers, Vickers, Eaton Hydraulics
- Product familySeparate the reference into the relevant valve, pump, motor or service-part group.
- Complete identifierPreserve every suffix, revision, material number and option character visible on the nameplate or document.
- Installed evidenceCompare interfaces, operating conditions and application before any replacement statement is released.
SERIES DIRECTORY
Commonly submitted Eaton / Vickers references
The table is an inquiry-routing index, not a compatibility chart. Every suffix and installed interface remains subject to review.
| Series reference | Product type | Primary review focus | RFQ route |
|---|---|---|---|
| DG4V / DG5V | Directional valves | Frame, spool, pilot arrangement and solenoid | Send full code |
| KDG / KBDG | Proportional valves | Command signal, electronics and spool function | Send full code |
| V10 / V20 | Vane pumps | Shaft, rotation, cover and ports | Send full code |
| 20V–45V / VQ | Single and multiple vane pumps | Cartridge, cover and section configuration | Send full code |
| PVB / PVH / PVQ | Piston pumps | Displacement, control, mounting and shaft | Send full code |
FAILURE-MODE REVIEW
Why the series rows need different evidence
These checks explain the decision risk behind each published reference. They are review rules, not a claim that every listed configuration is available.
| Reference | Mismatch risk | Evidence needed for release |
|---|---|---|
| DG4V / DG5V | The valve may mount but produce the wrong function, response or electrical behavior. | Code breakdown, hydraulic function, interface drawing and electrical data. |
| KDG / KBDG | The valve may mount but produce the wrong function, response or electrical behavior. | Code breakdown, hydraulic function, interface drawing and electrical data. |
| V10 / V20 | Rotation, control, shaft, flange or port differences can prevent installation or damage the system. | Code breakdown, displacement/control data and dimensional interface comparison. |
| 20V–45V / VQ | Rotation, control, shaft, flange or port differences can prevent installation or damage the system. | Code breakdown, displacement/control data and dimensional interface comparison. |
| PVB / PVH / PVQ | Rotation, control, shaft, flange or port differences can prevent installation or damage the system. | Code breakdown, displacement/control data and dimensional interface comparison. |
REQUIRED EVIDENCE
Prepare before quotation
- Complete model and part number
- Nameplate and connector or pump-side photos
- Required function and operating values
- Fluid and seal requirement
- Known replacement reason
APPLICATION ROUTING
Common inquiry environments
- Industrial power units
- Injection machinery
- Mobile hydraulics
- Repair and MRO
Submit a Eaton / Vickers reference for review.: Send the complete code, nameplate, quantity, destination and application. We separate confirmed facts, open points and conditional compatibility in the response.